The diagnostic equipment signals the following error: "C1200 - Battery voltage"
|
This error is signalled if the control unit detects a battery voltage that is too high or too low |
|
Test results |
||||
|
1 |
POWER SUPPLY CIRCUIT CHECK |
All OK |
Problems encountered |
Operation |
|
Check the battery voltage at the battery terminals using the Midtronics Micro 505 XL n. 1806515000 equipment |
Go to Step 2 |
1. Battery voltage not correct 2. Drop in voltage in the wiring |
1. Recharge the battery, if necessary, replace it 2. Renew the wiring, if necessary, replace the faulty components |
|
|
2 |
CORRECT OPERATION CHECK |
All OK |
Problems encountered |
Operation |
|
Delete the errors using the diagnostic equipment. Road test See Test 3340OA ABS SYSTEM INTERVENTION CHECK to ensure that the control unit checks whether the errors are still present. Return to the workshop and check that the fault is no longer present using the diagnostic equipment |
End of diagnosis |
|||