This error is signalled if the ABS solenoid valves cannot be activated. This means that there is an open circuit or short circuit (positive or earth) for the solenoid valves or the solenoid valves connection, that the solenoid valves are close to being short circuited or that the operating circuit is damaged

		Test results
1	ABS CONTROL UNIT REPLACEMENT	All OK	Problems encountered	Operation
	Replace the ABS electrohydraulic control unit Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT - R.R.	Go to Step 2
2	CORRECT OPERATION CHECK	All OK	Problems encountered	Operation
	Delete the errors using the diagnostic equipment. Turn the key OFF and then ON to ensure that the control unit checks whether the errors are still present. Check that the fault is no longer present	End of diagnosis