Contents

		Test results
1	CHECKS USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the diagnostic equipment and check that the accelerator pedal potentiometers are working properly	Go to Step 2	One of the potentiometers is not operating correctly	Replace the accelerator pedal Op. 1068A20 ACCELERATOR PEDAL WITH BUILT-IN POTENTIOMETER - R.R
2	ENGINE MANAGEMENT CONTROL UNIT POWER SUPPLY CHECK	All OK	Problems encountered	Operation
	Check that the engine control unit is receiving the correct power supply See E5030 PETROL ENGINES ELECTRONIC MANAGEMENT	Go to Step 3	Engine management control unit power supply missing	Restore the correct connections
3	ELECTRICAL CONNECTIONS CHECK	All OK	Problems encountered	Operation
	Check that the connection between the engine management control unit and the electric steering control unit is correct See E7045 ELECTRIC STEERING	Go to Step 4	CAN electrical connections faulty	Restore the correct connection.
4	CORRECT OPERATION CHECK	All OK	Problems encountered	Operation
	Delete the errors using the diagnostic equipment.	End of diagnosis	The fault persists	Go to Step 1